06
07
08
09
10
Functions
Weight Measurement
Your SRS3 scale is designed to measure
refrigerant tanks weighing up to 252 lbs.
Placing items over 252 lbs on the scale may
damage the scale.
1 Remove the scale from the padded case and
place the platform on solid, level ground.
2 Press for 1 second to turn on the platform.
3 Press for 1 second to turn on the display.
4 Press UNITS for 1 second to cycle through
LB OZ, LB, OZ, KG G, KG, and G.
5 Press ZERO for 1 second to tare the scale.
6 Set your tank on the platform and zero again
to view only the change in refrigerant.
7 View the change in weight in real-time when
charging or recovering refrigerant.
Backlight
Tap
to turn on the blue backlight on
the LCD. This is useful when the sun is going
down on late day jobs or any dark situation.
The backlight uses extra battery power than
standard use.
Auto Power Off (APO)
If the weight is unchanged for 30 minutes, the
platform will automatically power off.
To disable APO, while power is on tap twice
on the platform. The LED will briefly blink red
and APO will not be shown on the display.
To enable APO, while power is on tap twice
on the platform. The LED will briefly shine red
and APO will be shown on the display.
Syncing a Display to a Platform
The included remote display is setup to view
the platform at the factory. You shouldn't ever
need to re-sync them. You can sync two SRS3
remote displays to a single SRS3 platform if
desired.
1 Press SYNC for 1 second.
2 The ID# of a detected platform will show.
(This ID# is printed on the platform.)
3 Tap SYNC to cycle through any other platforms
detected.
4 Press SYNC for 1 second to select a platform.
Job Link
TM
:
If using the Job Link mobile app
as a display, add the SRS3 platform to the tool
manager in the app.
Tech Tips
Respect the Environment
Always use hoses with ball valves or low-loss
fittings to minimize harmful refrigerant gases
entering the atmosphere.
Account for Your Hose Weight
Connect the hoses to the system and tank
before zeroing the scale. After charge/recovery
is finished and the system is stable, note the
weight before removing hoses.
Use Your Appropriate G-Value
Acceleration due to gravity in m/s
2
(G-Value)
varies slightly depending on your altitude
and
location. Here are few cities' examples:
Los Angeles (default)
9.796
New York City
9.802
Paris
9.809
Sydney
9.797
Denver
9.798
1 Hold UNITS while powering on display.
2 With the current G-Value showing, tap SYNC
to increase value. Tap UNITS to decrease value.
3 Tap ZERO to save and exit.
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and receiver.
. Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
: To assure continued compliance, any changes or
modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to
computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Fieldpiece Instruments
1636 West Collins Avenue
Orange, CA 92867
Limited Warranty
This scale is warranted against defects in material or workmanship
for one year from date of purchase from an authorized Fieldpiece dealer.
Fieldpiece will replace or repair the defective unit, at its option, subject
to verification of the defect.
This warranty does not apply to defects resulting from abuse,
neglect, accident, unauthorized repair, alteration, or unreasonable
use of the instrument.
Any implied warranties arising from the sale of a Fieldpiece product,
including but not limited to implied warranties of merchantability and
fitness for a particular purpose, are limited to the above. Fieldpiece
shall not be liable for loss of use of the instrument or other incidental
or consequential damages, expenses, or economic loss, or for any claim
of such damage, expenses, or economic loss.
State laws vary. The above limitations or exclusions may not apply
to you.
Obtaining Service
E-mail Fieldpiece warranty department at [email protected]
for current fixed price repair service. Send check or money order made
out to Fieldpiece Instruments for the amount quoted. If your meter is
under warranty there will be no cost for the repair/replacement. Send
your scale, freight prepaid, to Fieldpiece Instruments. Send proof of
date and location of purchase for in-warranty service. The meter will
be repaired or replaced, at the option of Fieldpiece, and returned via
least cost transportation.
For international customers, warranty for products purchased
outside of the U.S. should be handled through local distributors. Visit
our website to find your local distributor.
www.fieldpiece.com
© Fieldpiece Instruments, Inc 2017; v12
