7
6
Description
Your SC480 is the essential clamp meter with
wireless functionality for the HVACR professional.
Send your electrical measurements directly to the
Job Link® System mobile app. Leave the meter
behind a closed blower door and view the current
measurement on your mobile device.
Help determine system efficiency by directly
measuring power consumption (W) of the system.
Use this value to inform your customer of energy
saving measures you can take to help them save
money on their energy bills.
The SC480 is great for troubleshooting mini-
split systems. Reach those cramped mini-split
connectors with the included RCT2 probe tips
for voltage and resistance measurements. Plus,
measure frequency (Hz) directly with clamp jaw.
Hang your SC480 clamp meter to any metallic
surface with the heavy-duty magnet. See both
voltage and amperage readings at the same time
on the big dual display.
Verify the order of 3-phase voltage lines with
just two leads. Capture L1L2 and L1L3 to check
that motor lines are correctly installed with Phase
Rotation test.
Take more accurate VAC and AAC readings on
variable frequency drives with True RMS sensing
technology. Measure the starting amp draw of a
compressor with Inrush current mode.
Illuminate the way with a powerful LED built into
the clamp jaw. Easily see your measurements with
the bright blue backlight on the display.
Take measurements more safely with one hand
using the single test lead holder. Test leads come
with removable gold plated tips to reliably connect
Fieldpiece accessory heads.
What’s Included
• SC480 Job Link® System Clamp Meter
• ADLS2 Deluxe Test Leads Kit
• ASA2 Alligator Clips
• RCT2
Molex
Probe Tips
• ATB1 Type K Thermocouple
• 1 Velcro Strap
• 9V Alkaline Battery (Not installed)
• ANC12 Protective Padded Case
• Operator’s Manual
Quick Start
1. For electrical testing, connect test leads to black "COM"
and red "+" jacks.
2. Rotate the dial to your desired measurement.
3. Connect to test points and read measurement.
4. For temperature testing, remove test leads, slide TEMP
switch to the right and connect a Type K thermocouple.
