Fieldmann FZI 4018 BI Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 32

Fieldmann FZI 4018 BI Скачать руководство пользователя страница 9

EN

INVERTER GENERATOR

USER MANUAL

9

Control panel functions

PARALLEL OUTLETS

Located just above the Ground Terminal, the generator’s Parallel Outlets enable a user to run two PG2000iSN
generator’s simultaneously. This operation requires special cables. When operating parallel generators, the rated
output is 3.0kVA and the rated current is 25A/120VAC. For cables and instructions consult a PULSAR dealer for
a PARALLEL OPERATION CABLE KIIT..

WARNING!

Never connect generators that are different models.

Only connect this generator to another PG2000iSN Standard Generator.
Only use a parallel operation cable kit designed to work with this Generator.

FUEL CAP

Turn counterclockwise to remove the fuel cap.

FUEL CAP AIR VENT

The fuel cap is equipped with an air vent to stop fuel from ﬂ owing
to the carburetor. The Air Vent must be in the “ON” position to
allow fuel to ﬂ ow so that the engine can run. Turn the Air Vent to
the “OFF” position to stop fuel ﬂ ow.

ON

OFF

GROUND TERMINAL

The generator’s ground terminal must always be used to connect
the generator to a driven ground rod. Connect the ground
terminal to the driven ground rod with a 12 AWG (American Wire
Gage) copper wire. The wire connects to the terminal between
the lock washer and nut. Tighten the nut securely to ensure
good connection. Grounding the generator protects you from
electric shock that results from a build up of static electricity or
undetected ground faults.

WARNING!

Generator must be properly grounded to prevent electrocution.

Only operate generator on a level surface.
Always connect the nut and ground terminal on the frame to an appropriate ground source.

«
...
7
8
9
10
11
...
»

Содержание FZI 4018 BI

































Отзывы:

Нет отзывов