
EN
16
FZI 4018 BI
Maintenance
6. MAINTENANCE
Regular maintenance will extend the life of this generator and improve its performance. The warranty does
not cover items that result from operator negligence, misuse, or abuse. To receive full value from the warranty,
operator must maintain the generator as instructed in this manual, including proper storage.
WARNING!
Before inspecting or servicing this machine, make sure the engine is off and no parts are
moving. Disconnect the spark plug wire and move it away from the spark plug.
CAUTION!
If you are unsure of how to perform a maintenance task, have the unit serviced by
a PULSAR dealer.
CAUTION!
Only use specifi ed PULSAR replacement parts.
MAINTENANCE SCHEDULE
PRE-OPERATION STEPS
Before starting the engine, perform the following pre-operation steps:
Check the level of the engine oil and the fuel tank level. Check for any leakage.
Check fuel hose for cracks or damage. Replace if necessary.
Make sure the air fi lter is clean.
Remove any debris that has collected on the generator and around the muffl er and controls. Use a vacuum
cleaner to pick up loose debris. If dirt is caked on, use a soft bristle brush.
Inspect the work area for hazards.
AFTER EACH USE
Follow the following procedure after each use:
Shut off engine.
Store unit in a clean and dry area.
After First 5 Hours
Change Oil.
After 8 Hours or Daily
Clean Debris.
Check Engine Oil Level.
6 Months
(100 hr Use)
Check and Clean Air Filter Element. (Service more often under wet or dusty
conditions.)
Change Engine Oil. (Service more often under dirty or dusty conditions.)
Check Muffl er Screen. Replace if necessary.
Service Spark Plug.
Inspect Muffl er and Spark Arrester.
Содержание FZI 4018 BI
