Fieldmann FZI 4018 BI, Руководство пользователя, Страница: 17 / 32

EN
INVERTER GENERATOR USER MANUAL
17 Maintenance
12 Months
(300 hr Use) Clean Fuel Filter. Replace if necessary.
Check Crankcase Breather Hose for cracks or damage. Replace if necessary.
De-carbonize cylinder head. See dealer.
Check and adjust Valve Clearance. See dealer.
Check all Fittings and Fasteners. See dealer.
CHECKING SPARK PLUG
Remove cap. Then remove spark plug cap.
Disconnect the spark plug wire from the spark plug.
Before removing the spark plug, clean the area around its base to prevent
debris from entering the engine.
Insert a spark plug socket wrench through the opening on the outside of
the cover. Turn the wrench counterclockwise.
Check for discoloration and clean carbon deposits off the electrode with
a wire brush.
Check the electrode gap and slowly adjust to 0.6 - 0.7mm (0.024-0.028
in) if necessary.
Reinstall spark plug and tighten to Torque 20.0Nm (14.8ft-lb).
If spark plug is worn replace only with an equivalent replacement part.
Spark plug should be replaced annually.
Reconnect spark plug wire.
Replace spark plug cap, then replace cap.
Standard Spark Plug: E6TC/E6RTC/BPR7HS
Spark Plug Gap: 0.6 - 0.7mm (0.024-0.028 in)
Spark Plug Torque: 20.0Nm (14.8ft-lb)
CARBURETOR ADJUSTMENT
The carburetor is low emission and is equipped with a non-adjustable idle mixture valve. If adjustment is needed
contact an authorized dealer.
OIL RECOMMENDATIONS
Do not use special additives.
Outdoor temperatures determine the proper oil viscosity for the engine. Use the chart to select the best
viscosity for the outdoor temperature range expected.