Fieldmann FDB 202201-E, Инструкция по эксплуатации

Страница: 18 / 131

1 8
OPERATING INSTRUCTIONS ELECTRICAL ANGLE GRINDER
EN Cleaning and maintenance | Operation and maintenance hints
8. CLEANING AND MAINTENANCE
Before cleaning and maintenance, always unplug the supply cable of the tool from the socket.
Your tool requires no additional lubrication or maintenance. It contains no parts that can be
repaired by you.
Never use water or chemical cleaners to clean your tool. Wipe the tool using a dry cloth.
Keep the engine fan apertures clean.
If you notice very weak sparking in the engine area, your tool is in good order. If the sparking
is more intense, it indicates the engine fault.
Never clean any part of the toll using a hard, sharp or rough object.
Inspection and Replacement of Carbon Brushes
Carbon brushes need to be checked on a regular basis.
In case of wear and tear, replace both carbon brushes simultaneously. Attach the carbon
brush holders.
After attaching new carbon brushes, let the grinder run, without load, for 5 minutes.
Use only correct types of carbon brushes.
Storage if the tool is not used for a long time
Do not store the tool in places with high temperatures.
Store the equipment in a place with constant temperature and humidity.
9. OPERATION AND MAINTENANCE
HINTS
Store the machine, Instruction Manual and the accessories in the original packaging. In
this way you will always have all the information and parts ready to hand.
Devices are to a large extent free of maintenance, you only need a damp cloth to clean the
casing. Do not drop electrical machines into water. Please note additional hints given in the
Instruction Manual.