Fieldmann FDAH 2002, Руководство пользователя

Страница: 17 / 20

OPERATING INSTRUCTIONS
DO NOT USE MOTOR OIL IN THE JACK.
ONLY USE ANTI-FOAMING JACK OIL.
ALWAYS USE A GOOD GRADE HYDRAULIC
JACK OIL.
DO NOT USE HYDRAULIC BRAKE FLUID,
ALCOHOL, GLYCERINE, DETERGENT, MOTOR
OIL OR DIRTY OIL.
USE OF A NON-RECOMMENDED FLUID
CANCAUSE DAMAGE TO A JACK.
AVOID MIXING DIFFERENT TYPES OF FLUID AND
NEVER USE BRAKE FLUID, TURBINE OIL,
TRANSMISSION FLUID, MOTOR OIL OR
GLYCERIN. IMPROPER FLUID CAN CAUSE
PREMATURE FAILURE OF THE JACK AND THE
POTENTIAL FOR SUDDEN AND IMMEDIATE LOSS
OF LOAD.
DISPOSE OF HYDRAULIC FLUID IN
ACCORDANCE WITH LOCAL REGULATIONS.
ADDITIONAL LUBRICATION:
Periodically check the pump piston and ram
for signs of rust or corrosion. As needed
thoroughly wipe with a clean non-scratching
oil soluble cloth. NEVER USE SANDPAPER OR
ABRASIVE MATERIAL ON THESE SURFACES!
When not in use, store the jack with pump
piston and ram fully retracted.
ADDITIONAL WARNINGS:
5. Turn the jack upside down to drain old oil from
the oil fill hole.
6. Position the jack on level ground and keep
saddle in the lowered position. Fill the oil
case until oil level is just beneath the lower
rim. Keep dirt and other foreign materials
clear when pouring.
8. Replace the cover plate and perform the Air
Purge Procedure.
Remove the oil plug. 4.
7. Replace oil plug.
3. Remove cover plate.
HYDRAULIC FLOOR JACK
HYDRAULIC FLOOR JACK
HYDRAULIC FLOOR JACK
1 8 EN
Operating instructions