Fieldmann FDAH 2002, Руководство пользователя

Страница: 5 / 20

EN 6
FDAH 200 2
General safety instructions
FDK 2001-E
10 EN General safety instructions
2.GENERAL SAFETY RULES
WARNING:
Read and understand all instructions. Failure to follow all instructions
listed below may result in serious injury.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must
be understood by the operator that common sense and caution are factors that
cannot be built into this product, but must be supplied by the operator.
CAUTION: Do not allow persons to operate or assemble this jack until they
have read this manual and have developed a thorough understanding of
how the jack works.
DO NOT OPERA TE OR REP AIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the Service Jack and user safety, the responsibility of the owner is
to read and follow these instructions.
Inspect the service jack for proper operation and function.
Keep instructions readily available for equipment operators.
Make certain all equipment operators are properly trained; understand how to
safely and correctly operate the unit.
Allow unit operation only with all parts in place and operating properly.
Use only genuine replacement parts.
Service and maintain the unit only with authorized or approved replacement
parts; negligence will make the jack unsafe for use and void the warranty.
Carefully inspect the unit on a regular basis and perform all maintenance as required.
Store these instructions in the handle of your jack.
Keep all decals on the unit clean and visible.
For purpose of car lifting only, max. 2t
Can be used on straight and strong surface less than 3 degrees
angle Ano the r pur op ose of usage is st rictly pro hi bit ed
DO NOT LIE DOWN UNDER THE LIFT E D CAR! !! ALWAYS USE THE SUPPORT!!!
Before using this product, read the owner's manual completely and familiarize
yourself
thoroughly with the product and the hazards associated with its improper use.
Perform the air purge procedure. ( See System Purge Procedure.)
Check and that the pump operates smoothly before putting into service.
Inspect before each use . Do not use if bent , broken or cracked components are
noted.