Fieldmann 50004955, Руководство пользователя

Страница: 19 / 21

EN 20
FDAK 70205-0
8. TROUBLESHOOTING
1. The trigger is pressed but the device is not working: For the cordless device to work, you need a su°ciently
charged battery. The battery will go ˛at if you do not use the cordless device for an extended period of time.
Try charging the battery. Check that the battery is correctly seated in the charger. The charger will heat up
while charging, this is normal.
2. The battery is leaking: At extreme temperatures or when under extreme load, a small amount of leakage may
occur. If you happen to touch the ˛uid, immediately wash it o˝ your skin or clothing with soap and water.
3. The battery is not charging and the light on the charger is not lit: If the battery is not charging, check that it is
correctly seated in the charger and check that the indicator light is lit. If it is not lit, check that the power plug
of the charger is correctly plugged into the socket. If it is, check the socket’s fuse/circuit breaker.
4. The body of the device heats up a˙er extended use: Under normal load the body, trigger and battery will heat
up because the energy consumed when drilling generates heat. This is normal. Simply allow the device to
cool down for several minutes.
5. The battery heats up during use: Energy drawn from the battery generates heat. It does not damage the
battery, heat from drawing energy is normal. If you wish to cool the battery down, allow the device to cool
down for a few minutes before continuing with work.
6. The battery heats up while charging: This is normal and is the result of chemical reactions taking place inside
the battery during the charging process.
7. The charging unit will heat up while charging: This is normal and is caused by the reduction of voltage from
230V to 20V.
TROUBLESHOOTING