background image

WARNING:

 

Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage 

or blindness.Never operate the UV-Aire

 Air Purifying System out of the plenum. Avoid touching the glass portion of the lamp with your hands.

Page 11 of 12

CLEAN-UP OF BROKEN LAMPS

(see warnings on page two of this manual)
UV lamps contain a small amount of mercury, like a typical fl uorescent lamp. DO NOT touch any of the mercury 
with your bare hands.

1. While wearing disposable, non-absorbent protective gloves, carefully pick up the large pieces of glass 

with your hands.

2. Vacuum the entire area with a standard household vacuum cleaner ensuring the removal of all lamp 

material.

3.  Dispose of the pieces of glass, the vacuum cleaner bag, and the disposable gloves in a sealed garbage bag.
4. Check with your local waste management authority for local disposal or recycling requirements. 

According to the EPA's Universal Waste Rule, these types of lamps may be disposed of into household 
waste.

5. Wash hands, and remove and wash clothes for added safety measures.

Replacement Part Number

46649301

11” Lamp Assy Duo

46649302

14” Lamp Assy Duo

46511200

16” Lamp Assy

46638900 

24V Multi-Mount Transformer

46529500

24V Plug-in Transformer

60530005024

QT-Ballast-24V RPLC Ballast Assy DUO UV16

60530005120

QT-Ballast-120V RPLC Ballast Assy DUO UV16

730118107

Carbon, DUO-11

730118127

Carbon, DUO-14

730118147

Carbon, DUO-16

80213041110

PRO-Cell Honeycomb, DUO-11

80213041130

PRO-Cell Honeycomb, DUO-14

80213041150

PRO-Cell Honeycomb, DUO-16

P/N 46648100  09/18  Rev J

For replacement parts, contact Field Controls at:

Phone: 252-522-3031 • Fax: 252-522-0214

Email: sales@fi eldcontrols.com

REPLACEMENT PARTS LIST

Содержание Healthy Home System DUO-11/120













Отзывы: