background image

www.fi eldcontrols.com

Please retain these instructions after installation.

This device 

MUST

 be installed by a qualifi ed agency in accordance with the manufacturer's installation instructions. The defi nition of 

a qualifi ed agency is: any individual, fi rm, corporation or company which either in person or through a representative is engaged 
in, and is responsible for, the installation and operation of HVAC appliances, who is experienced in such work, familiar with all the 
precautions required, and has complied with all the requirements of the authority having jurisdiction.

Installation Date:

Installed By:

Phone:

Models: DUO-11/24, DUO-11/120, DUO-14/24, DUO-14/120, PCUV-16UA, DUO-16/24, DUO-16/120

The Duo & PCUV models produce germicidal UVC Band light rays, which sterilize and reduce airborne 
microorganisms and reduce Volatile Organic Compounds (VOC’s) by a combination of photocatalytic chemical 
reaction and carbon absorption as air passes through a heating or air conditioning system.  They are installed in 
the main supply or return duct and operate continuously to automatically purify the air in the home 24 hours a day.

The PCUV-16UA PCO Upgrade Kit is intended for retrofi t to an existing UV-16 or AH-1 germicidal UVC lamp 
installation.  The PCUV-16UA provides a new mounting structure with photo-catalytic VOC reduction and 
carbon absorption technology for the existing lamp installation.

This product is not sold as a medical device and is not for the purpose of diagnosis of any disease or condition, 
nor for use in the mitigation, treatment, or prevention of any disease or condition.

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY 

READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY 

BEFORE PROCEEDING WITH THE INSTALLATION.

BEFORE PROCEEDING WITH THE INSTALLATION.

        WARNING: Duo-11/24V, Duo-14/24V  and Duo-16/24V models are intended for use with 24V ONLY!

        WARNING: Duo-11/24V, Duo-14/24V  and Duo-16/24V models are intended for use with 24V ONLY!

Do  not 

Do  not exceed voltage rating. Severe damage to device and or fi re could result.  Verify proper voltage.

exceed voltage rating. Severe damage to device and or fi re could result.  Verify proper voltage.

ITEMS INCLUDED IN KIT:

1 - 24 Volt or 120 Volt UV-Aire Ballast  
     Assembly (not included with PCUV)

1 - Photo-Catalytic and Carbon Duct 

Media

1 - UVC Germicidal Lamp
     (not included with PCUV)

4 - Sheet Metal Mounting Screws

1 - Instruction Sheet

1 - Duct Board Mounting Bracket

1 - 24V Multi-Mount Transformer TR50VA
    (included  with 11/24 & 14/24 models)

1 - 24V Plug-in Transformer TR12024P
     (included with 16/24 models)

2 - Fork Terminals

PHOTO-CATALYTIC AIR PURIFIER SYSTEMS

P/N 46648100  09/18  Rev J

*includes

carbon

fi lter

PCUV-16UA ONLY

Содержание Healthy Home System DUO-11/120













Отзывы: