Fidelity Measurement CSa, Руководство по эксплуатации

Страница: 31 / 72

31
10.3.3.3 Other settings if Lab 4 / Lab 5 is selected
1.
Instrument displays current statistic data output
22
(Sd) setting (On /
Off). When Sd is set to On, the below statistical results will also be
transmitted.
•
Max = Maximum Value
•
Min = Minimum Value
•
Diff = Differentiation (Max – Min)
•
X = Mean (Average)
•
Sd = Standard Deviation. Formula used:
•
Srel = Relative Standard Deviation
2.
Press [Func] or [Unit] until the preferred parameter appears then
press [Print/M+] t o save.
3.
At this point, Lab 4 / Lab 5 setup is completed .
10.3.3.4 Other settings if LP-50 / TSC is selected
1.
Instrument displays number of copy to generate each time. 8
parameters (1~8) are available. Press
[Func] or [Unit] until the
preferred parameter appears then press [Print/M+] to save.
2.
Instrument displays label file number (FL1 01 ~ FL1 99) to print in
label format group 1. Press
[Func] or [Unit] until the preferred
label file number appears then press [Print/M+] to save.
3.
Instrument displays label file number (FL2 01 ~ FL2 99) to print in
label format group 2. Press
[Func] or [Unit] until the preferred
label file number appears then press [Print/M+] to save.
4.
At this point, LP-50 / TSC setup is completed.
10.3.4 When comport is set as Auto (Auto 1~3)
1.
Instrument displays baud rate. 9 parameters (1200~256000) are
available. Press
[Func] or [Unit] until the preferred parameter appears
then press [Print/M+] to save.
2.
Instrument displays Parity. 3 parameters (None, odd, even) are
available. Press
[Func] or [Unit] until the preferred parameter appears
then press [Print/M+] to save.
3.
Instrument displays Data length. 2 parameters (7, 8) are available.
22
Statistic data output calculates weight data only extra statistic data will be output if Sd is
set to On.