Fidelity Measurement CSa Скачать руководство пользователя страница 28

Страница: 28 / 72

•

If Scanner is selected, refer to

10.3.5

for setting details.

10.3.1 When comport is set as PC

Instrument displays baud rate. 9 parameters (1200~256000) are
available. Press

[Func]

[Unit]

until the preferred parameter appears

then press

[Print/M+]

to save.

Instrument displays Parity. 3 parameters (None, odd, even) are available.
Press

[Func]

[Unit]

until the preferred parameter appears then press

[Print/M+]

to save.

Instrument displays Data length. 2 parameters (7, 8) are available. Press

[Func]

[Unit]

until the preferred parameter appears then press

[Print/M+]

to save.

Note

: - baud rate, parity and data length settings will be bypassed when

Bluetooth or WIFI is enabled in F38. If it is the case, baud rate 115200
will be employed by default.

Instrument displays output protocol type. 10 parameters (Prot 0~9) are
available. Press

[Func]

[Unit]

until the preferred parameter appears

then press

[Print/M+]

to save.

Instrument displays time interval (in second) between each output. 10
parameters (0, 0.5, 1, 1.5, 10, 30, 60, 90, 120, and 300) are available. 0
= continuous output. Press

[Func]

[Unit]

until the preferred parameter

appears then press

[Print/M+]

to save.

At this point, PC setup is completed.

10.3.2 When comport is set as CMD

Instrument displays baud rate. 9 parameters (1200~256000) are
available. Press

[Func]

[Unit]

until the preferred parameter appears

then press

[Print/M+]

to save.

Instrument displays Parity. 3 parameters (None, odd, even) are available.
Press

[Func]

[Unit]

until the preferred parameter appears then press

[Print/M+]

to save.

Instrument displays Data length. 2 parameters (7, 8) are available. Press

[Func]

[Unit]

until the preferred parameter appears then press

[Print/M+]

to save.

Note

: - baud rate, parity and data length settings will be bypassed when

Bluetooth or WIFI is enabled in F38. If it is the case, baud rate 115200

Содержание CSa









































































Результаты поиска

Содержание CSa

Отзывы:

Бренды по названию

Популярные бренды

Fidelity Measurement CSa, Руководство по эксплуатации

Результаты поиска

Содержание CSa

Отзывы:

Бренды по названию

Популярные бренды