Fidelity Measurement AFM18 Скачать руководство пользователя страница 63

Страница: 63 / 78

www.fi-measurement.com

9. Label Printing (LP-50 or Compatible)

This instrument supports label printing by LP-50 and any LP-50 compatible

label printers. Contact your dealer for more information about label printers.

Comport used to connect with the label printer must be assigned for

bi-directional communication; otherwise no printout will be generated. Refer to

Appendix A

for setting information.

Set all preferred operation parameters according to F18 listed on

5.4 Internal

Function Table

Cautions: -

1. Always design independent labels for different working modes. Do not

combine data of different working modes on the same label.

2. Do not print any labels of non-current working mode. This will retrieve

wrong data of non-current working mode.

3. Print only label data when the same working mode is in operation.

4. Do not combine data of various working modes on same label. This will

retrieve wrong data of non-current working mode.

9.1 Label Format Groups & Label File Names

2 label format groups are available, these are

For 1

(label format group 1) and

For 2

(label format group 2).

9.1.1 For 1 (Label Format Group 1)

For 1

(format group 1) is for current transaction data printing (during normal

working status).

In order to trigger the right label to be printed, label files stored in printer for

this format group 1 must have a file name of AA1.dlb, AA2.dlb, AA3.dlb,

AA4.dlb and AA5.dlb.

In this instrument, 5 printout selections are available in format group 1: -

•

For 1 1: - Select this to print label file AA1.dlb stored in printer.

•

For 1 2: - Select this to print label file AA2.dlb stored in printer.

•

For 1 3: - Select this to print label file AA3.dlb stored in printer.

Содержание AFM18















































































Результаты поиска

Содержание AFM18

Отзывы:

Бренды по названию

Популярные бренды

Fidelity Measurement AFM18, Руководство по эксплуатации

Результаты поиска

Содержание AFM18

Отзывы:

Бренды по названию

Популярные бренды