6.5 MEMORY ACCUMULATION FUNCTION
6.5.1 To Accumulate a Transaction to Memory
10
11
12
a. Press
[M+]
13
to save and accumulate data of current transaction to
memory,
b. This scale
displays “
≡ n
”.
M+
INDICATOR
appears to indicate that
memory contains stored data. “
≡ n
”” means the total number of
transactions accumulated to memory,
c. This scale returns to normal display status after 2 seconds,
d. Repeat
a
to
c
for subsequent transactions
14
,
NOTE: -
1. Unstable weight cannot be accumulated to memory. If
M+
is
pressed when weight reading is not unstable, this scale will reject
this command and response with 3 beeps.
6.5.2 Memory Recall and Clearance
a. Press
MR
to recall total accumulated weight from memory,
b. After
MR
is pressed, This scale
displays “
≡ n”
(
n
means the number
of transactions accumulated) follow by the total accumulated weight
stored in memory,
c. At this point: -
Press
[ZERO]
to quit, or
Press
[ZERO]
followed by
[CE]
to clear memory and return operation.
M+ INDICATOR
disappear to indicate no data is stored in memory.
6.6 FUNCTION MODES
This scale is equipped with the below function modes: -
Piece Count,
Percentage,
Animal weighing (When F11 = on),
Checkweighing (HI/LO check) for above functions.
10
Memory Accumulation Function support weighing function only.
11
Weight less than 20d (or 20d
1
for dual range) will not be accumulated to memory.
12
All data stored will be erased when this instrument is powered off.
13
or press
[PRINT]
if F17 is = ON
14
Weight must return to or below zero to enable another weight accumulation.
