manualshive.com logo in svg

FIC PT-2010, Руководство пользователя, Страница: 58 / 66

Поделиться
Скачать
FIC PT-2010 Скачать руководство пользователя страница 58

PT-2010 Mainboard Manual

HDD Power Down

Selecting Disable will not turn off the hard disk drive (HDD) motor.

Selecting 1 Min.. 15 Min allows you define the HDD idle time before the

HDD enters the Power Saving Mode. The option When Suspend lets the
BIOS turn the HDD motor off when system is in Suspend mode.

The options 1 Min.. 15 Min and When Suspend will not work concurrently.
When HDD is in the Power Saving Mode, any access to the HDD will wake

the HDD up.

The options are: Disable (Default), 1 Min.. 15 Min, When Suspend.

 12 (Wake-Up Event)

Selecting OFF allows the BIOS to refrain from waking up the system.

Selecting ON allows the BIOS to wake up the system 

 Doze mode,

Standby mode, or Suspend mode.

The options are: OFF, ON.

The default of 

 4, 12 (Wake-Up Event): ON.

The default of 

 (Wake-Up Event): OFF.

Power Down Activities   IRQ3   

Selecting ON will enable the power management timers when a no activity

event is detected in the specified I/O port or component.

Selecting OFF will disable the PM timer even if a no activity event is

detected.
The options are: ON, OFF.
The default value of IRQ3 

 IRQ4 

 IRQ12 

 Mouse),

IRQ14 (Hard Disk) : ON.

The default setting of other 

 

54

Содержание PT-2010



































































Отзывы:

Нет отзывов