manualshive.com logo in svg

FIC PT-2010, Руководство пользователя, Страница: 51 / 66

Поделиться
Скачать
FIC PT-2010 Скачать руководство пользователя страница 51

Award BIOS Setup

Swap Floppy Drive

Allows you to switch the order in which the operating system accesses the

floppy drives during boot up.
The options are: Enabled, Disabled (Default)

Boot Up Floppy Seek

When enabled, assigns the BIOS to perform floppy diskette drive tests by
issuing the time-consuming seek commands.
The options are: Enabled (Default), Disabled.

Boot Up Numlock Status

When set to On, allows the BIOS to automatically enable the Num Lock

Function when the system boots up.
The options are: On (Default), Off.

Boot Up System Speed

Allows you to adjust the system speed when the system boots up.

The options are: High (Default), Low.

Gate A20 Option

When set at Fast, allows a faster access response under Protected mode.

The options are: Fast (Default), Normal.

Typematic Rate Setting

The term typematic means that when a keyboard key is held down, the
character is repeatedly entered until the key is released. When this item is

enabled, you may change the typematic repeat rate.
The options are: Disabled (Default), Enabled.

Typematic Rate 

Sets the rate of a character repeat when the key is held down.
The options are: 6 (Default), 8, 10, 12, 

 30.

Typematic Delay (Msec)

Sets the delay time before a character is repeated.

The options are: 250 (Default), 500, 750, 1000 millisecond.

Security Option 

Allows you to set the security level of the system.

The options are: Setup (Default), System.

47

Содержание PT-2010



































































Отзывы:

Нет отзывов