FIC PT-2010 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 66

FIC PT-2010 Скачать руководство пользователя страница 13

Overview

Channels of ISA Cards

Some Legacy and

ISA add-on cards may also need to use a Direct Memory

Access (DMA) channel. DMA assignments for this mainboard are handled in

the same way as the IRQ assignment process outlined above. For more

information, please refer to Chapter 3 of this manual.

Enhanced IDE

This mainboard features an integrated Enhanced IDE controller that provides

convenient, high-speed connections with up to four IDE devices, such as Hard
Disk, CD-ROM and Tape Backup Drives. Enhanced IDE is an upgrade of the
original IDE specification and provides increased capabilities and performance

in a number of areas, including support for Hard Disk Drives of over

and

faster data transfer rates utilizing the

Mode 4 timing scheme.

With the integrated IDE controller you can connect up to four IDE peripheral
devices to your system. All devices are categorized in the same way that IDE
Hard Disks were configured in the past, with one device set as the Master device
and the other as the Slave device. We recommend that Hard Disk Drives use the
Primary IDE connector and that CD-ROM drives utilize the Secondary IDE
connector for improved system performance.

«
...
11
12
13
14
15
...
»

Содержание PT-2010



































































Отзывы:

Нет отзывов