MCM1000S/L GBE module
5
3
– Product List
The MCM1000S/L module is offered in the following preconfigured versions:
MCM1000S-LX1
1000SX multi-mode 850nm, 220m, to 1000LX single mode 1310nm Conversion
Module, 10km, 2*Duplex SC,
MA
MCM1000S-LX2
1000SX multi-mode 850nm, 220m, to 1000LX single mode 1310nm Conversion
Module, 20km (over G.652 fiber), 2*Duplex SC,
MA
MCM1000S-LX3
1000SX multi-mode 850nm, 220m, to 1000LX single mode
1550nmDFBTx/1550nmRx, Conversion Module, 40km. 2*Duplex SC,
MA
MCM1000S-LX4
1000SX multi-mode 850nm, 220m, to 1000LX single mode
1550nmDFBTx/1550nmRx, Conversion Module, 80km. 2*Duplex SC,
MA
MCM1000S-LXF13
1000SX multi-mode 850nm, 220m, to 1000LX Single Fiber Strand,
1310nmTx/1550nmRx, Conversion Module, 20km (over G.652 fiber),
1xduplex/1xsimplex SC,
MA
MCM1000S-LXF15
1000SX multi-mode 850nm, 220m, to 1000LX Single Fiber Strand,
1550nmDFBTx/1310nmRx, Conversion Module, 20km (over G.652 fiber),
1xduplex/1xsimplex SC,
MA
MCM1000S-ZXF13
1000SX multi-mode 850nm, 220m, to 1000LX Single Fiber Strand,
1310nmTx/1550nmRx, Conversion Module, 40km (over G.652 fiber),
1xduplex/1xsimplex SC,
MA
MCM1000S-ZXF15
1000SX multi-mode 850nm, 220m, to 1000LX Single Fiber Strand, 1550nmDFBTx/
1310nmRx, Conversion Module, 40km (over G.652 fiber), 1xduplex/1xsimplex SC,
MA
MCM1000L-LX1-2
1000LX single-mode 1310nm, 10Km to 1000LX single-mode 1310nm Extender
module 20Km (over G.652 fiber), 2*Duplex SC,
MA
MCM1000L-LX1-3
1000LX single-mode 1310nm, 10Km to 1000LX single-mode 1550nm DFB Extender
module 40Km, 2*Duplex SC,
MA
MCM1000L-LX1-4
1000LX single-mode 1310nm, 10Km to 1000LX single-mode 1550nm DFB Extender
module 80Km, 2*Duplex SC,
MA
MCM1000L-LX3-3
1000LX single-mode, 1550nmDFBTx/1550nmRx, 40Km to 1000LX single-mode
1550nmDFBTx/1550nmRx, Extender module 40Km, 2*Duplex SC,
MA
MCM1000L-LX4-4
1000LX single-mode, 1550nmDFBTx/1550nmRx, 80Km to 1000LX single-mode
1550nmDFBTx/1550nmRx, Extender module 80Km, 2*Duplex SC,
MA
MCM1000L-LX4-5
1000LX single-mode 1550DFB, 80Km to 1000LX single-mode 1550nm DFB/APD
Extender module, 120Km, 2*Duplex SC,
MA
All MCM1000S/L series modules have identical functionality. Therefore, any description
and features of one module refers to all other types.
The F/O ports supports GBE 1000Base-SX/LX transmissions, set to 1000Base-FX and
FDX (Full Duplex).
Any network device which connects to the F/O ports of
MCM1000S/L module should be configured to Auto-Negotiation disabled mode
(forced to 1000Base-FX and FDX) to obtain the link connectivity.
The modules incorporate on board DIP switches (LST ON/OFF, Loop-Back ON/OFF)
per port to easily perform troubleshooting and maintenance functions.
Recall that Port 1 (normally 1000Base-SX type port) can be offered as 1000Base-LX
port (MCM1000L-LX Extender series).
Port 2 (1000Base-LX) is normally connected to a remote GBE device.
The MCM1000S modules, installed in the MetroStar System chassis, can be managed
locally through the serial connection (CLI) or a Telnet connection through a SNMP
Manager station. With MMM-04 module, Web management is also available Refer to
section 8 for more details.
The module is managed also by the FibroLAN MetroView Device Manager.
Note: the firmware or software update for the various MetroStar modules and
remote MA CPE devices is implemented by means of the TFTP routine.
