Fibocom MC610 Series Скачать руководство пользователя страница 64

Страница: 64 / 70

FIBOCOM MC610 Series Hardware Guide

64/70

7 Warning

7.1 CE warning

The EUT is a mobile device; maintain at least a 20 cm separation between the EUT and the user's body

and must not transmit simultaneously with any other antenna or transmitter.

7.2 FCC warning

OEM/Integrators Installation Manual

Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2. This

module is limited to installation in mobile or fixed applications, according to Part 2.1091(b). 3. The

separate approval is required for all other operating configurations, including portable configurations

with respect to Part 2.1093 and different antenna configurations. 4. For FCC Part 15.31 (h) and (k):

The host manufacturer is responsible for additional testing to verify compliance as a composite

system. When testing the host device for compliance with Part 15 Subpart B, the host manufacturer

is required to show compliance with Part 15 Subpart B while the transmitter module(s) are installed

and operating. The modules should be transmitting, and the evaluation should confirm that the

module's intentional emissions are compliant (i.e. fundamental and out of band emissions). The host

manufacturer must verify that there are no additional unintentional emissions other than what is

permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s). The

Grantee will provide guidance to the host manufacturer for Part 15 B requirements if needed.

End Product Labeling

When the module is installed in the host device, the FCC/IC ID label must be visible through a

window on the final device or it must be visible when an access panel, door or cover is easily

re-moved. If not, a second label must be placed on the outside of the final device that contains the

following text: “Contains

FCC ID: ZMOMC610LA

”. The FCC ID can be used only when all FCC

compliance requirements are met.

Содержание MC610 Series







































































Результаты поиска

Содержание MC610 Series

Отзывы:

Бренды по названию

Популярные бренды

Fibocom MC610 Series, Руководство по оборудованию

Результаты поиска

Содержание MC610 Series

Отзывы:

Бренды по названию

Популярные бренды