fiberon ARMORGUARD SEC19 CW 6KD Скачать руководство пользователя страница 3

 

3 FIBERONDECKING.COM 

 

 

Please contact 1-800-230-7547 for further assistance.

Warranty

20 YEAR PERFORMANCE LIMITED WARRANTY

WHAT IS COVERED

This railing product is covered under a Limited Residential Warranty to protect against checking, splitting, decay, rot and splintering.

WHAT IS NOT COVERED

In no event will the manufacturer be liable for any direct, indirect, incidental, special, consequential, punitive, exemplary, statutory, special, 
or other, damages based upon the manufacturer products or manufacturer fasteners or resulting, directly or indirectly, from any defect in 
the manufacturer  products or fasteners, including but not limited to damage to, diminution in value of and/or loss of use or enjoyment of, 
any property or part thereof, whether based on contract, tort, strict liability, statute, regulation or otherwise, even if the manufacturer is 
expressly advised about the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential 
damages in certain circumstances, so the above limitation may not apply to you.
In addition, this Limited Warranty does not cover and the manufacturer shall not be liable for any installation, removal or reinstallation 
costs. The manufacturer does not warrant against and is not responsible for, and no express or implied warranty shall be deemed to cover, 
any condition attributable to: (1) improper installation of products and/or failure to abide by the manufacturer’s written instructions and 
any applicable laws or building codes, including but not limited to improper structural support, fastening, ventilation or gapping; (2) use 
of the manufacturer‘s products beyond normal use or in an application not recommended or permitted by the manufacturer’s written 
instructions and applicable laws and building codes; (3) movement, distortion, collapse or settling of the ground or the supporting structure 
on which the manufacturer’s products are installed; (4) Defects in or failure arising from decking structure resulting from water caused 
by improper installation, workmanship, maintenance or repair; (5) any Act of God (including but not limited to flooding, hurricane, tornado, 
wind, earthquake, lightning, hail, etc.); (6) discoloration, fading, spotting or staining from or caused, in whole or in part, by mold, mildew, 
other fungal growth, organic materials, metallic oxides or particles (including but not limited to rust or corrosion of any fasteners), dirt, 
other atmospheric or environmental pollutants, foreign substances such as grease or oil, chemicals (including but not limited to those found 
in cleaners), or normal weathering (defined as natural efflorescence, exposure to sunlight, weather and atmospheric conditions which 
causes any colored surface to gradually fade, flake, chalk, or accumulate dirt or stains); (7) damage resulting from casualty, fire or exposure 
to heat sources such as cooking devices or retro-reflective surfaces; (8) the application of paints, stains, surface treatments or other 
chemical substances including but not limited to cleaners or pesticides; (9) fading, flaking or other deterioration of any paints, stains or 
other coatings placed on the manufacturer’s products; (10) climate change, environmental conditions, static electricity or any cause beyond 
the control of the manufacturer; (11) variations or changes in color of the manufacturer’s products; (12) improper handling, maintenance, 
storage, abuse or neglect of the manufacturer’s products by Purchaser or others; (13) ordinary wear and tear; (14) impact from objects; or 
(15) any fasteners not supplied or approved by the manufacturer.
No warranty is given with respect to any fasteners other than the fasteners produced by the manufacturer. Other fasteners, whether 
approved fasteners or otherwise, are subject to only the warranties provided by the manufacturer of the fastener and Purchaser’s sole 
warranty and remedy is with that manufacturer.
Contact the Customer Service Team at 1-800-230-7547 or visit FIBERONDECKING.COM.

Содержание ARMORGUARD SEC19 CW 6KD















Отзывы: