Fiberlink FL-117, Руководство пользователя

Страница: 21 / 26

18
4 . 3 Place new battery pack
Aligning the card slot, place new battery into the power module and
make sure it is plugged in tightly, then close the cover of the battery
case which is at the bottom of the Fusion Splicer.
5
￡
Power Supply
Power does not turn off when pressing
Press and hold the key until the LED color changes from red to green.
Release to shut off the machine.
Few splices can be made with a fully charged battery pack
The battery pack uses chemical reaction. The capacity decreases at low
temperature, especially at lower than 0 degree.
At high altitude, the arc discharge current is increased. In this condition,