FiberHome HG6143D, Руководство по эксплуатации продукта

Страница: 41 / 101

3 Web Configuration Guide
2. Configure the parameters of the 2.4G wireless network, such as the SSID,
password, security mode and algorithm. For details of the parameters, see
Table 3-3.
3. Click Apply to save and apply the configuration.
Table 3-3 Advanced Setting Parameters of Wireless Network
Item
Description
SSID Choice
Select the SSID. The value range is 1 to 4.
Enable /
Disable
Enables or disables the corresponding SSID.
SSID Name
The wireless network name, used to identify different wireless networks.
Hidden
Select whether to hide the SSID. When the SSID is hidden, the wireless
terminal cannot detect the wireless signals unless the SSID is entered.
Security Mode
The authentication mode for the wireless terminal requiring access to the
wireless network. The options include OPEN, SHARED, WEPAUTO, WPA-
PSK, WPA2-PSK and WPAPSKWPA2PSK.
u OPEN: Unencrypted. Any terminal can access the wireless network;
therefore, the security cannot be guaranteed. This mode is not
advisable.
u SHARED: This mode is based on the WEP encryption protocol, where
the same key is configured for the wireless access client end and
equipment side to provide the same security level as the wired LAN. It is
a traditional WLAN security protocol.
u WEPAUTO: Both OPEN WEP and SHARED WEP are supported.
u WPA-PSK: This mode is based on the WLAN security protocol, where a
key is pre-configured for the wireless access client end. The equipment
side authenticates the legality of the wireless access client end key by
the 4-way handshake key agreement protocol. This provides a safer and
more confidential wireless network service than WEP.
u WPA2-PSK: WPA2 is the second edition of WPA.
u WPAPSKWPA2PSK: the authentication mode combining WPA and
WPA2.
WPA
Algorithms
The encryption algorithms include TKIP, AES and
TKIPAES.
This item should be
configured if the
authentication mode
is WPA-PSK,
WPA2-PSK or
WPAPSKW-
PA2PSK.
Pass Phrase
Enter the SSID key.
Encrypt Type
Select to enable or disable the WEP encryption when the network
authentication mode is OPEN.
Version: A 33