4
1. Introduction
Fiber SenSys Alarm Processing Units (APUs) have integrated networking capabilities (may be
offered optionally on some models). This feature allows many APUs connected into a local-area
network (LAN) to integrate with an existing head end, or other annunciator/monitoring
equipment. The physical network supported by Fiber SenSys APUs is 10/100 wired Ethernet
and the networking protocol supported is TCP/IP.
This application note is intended for information-technology (IT) personnel or a network
administrator who has an operating knowledge of the network administration and the network
where the APU is being installed. After reading this document, you should be able to:
1. Determine if a particular APU supports networking
2. Physically connect an APU to a network
3. Configure the network settings on an APU
Please read through this document
before
installing the APUs, as some steps may require
physical access to the APUs.
Detailed information regarding the network protocols used by the APUs are provided in
appendices.
CAUTION
: Network design, installation, and management can be complex and are outside
the scope of this document. Please consult with IT or networking professionals to discuss
the needs for your particular application.
