16
b.
Outgoing
connections are made from the APU to external monitoring equipment.
This is used for integration with Fiber SenSys FiberCommander.
i. set the
Active Connect
menu is set to
Auto Start
ii. In the
Endpoint Configuration
section of the
Connection Settings
screen, verify or enter the correct information, according to the following
formats and uses:
Local Port
10001
incoming
or
outgoing
Remote Host XXX.XXX.X.XXX
outgoing
Remote Port 10000
outgoing to FiberCommander
The Remote Host entry should contain the IP address for the monitoring
equipment, such as the PC running FiberCommander.
Figure 18:
Settings for an
Outgoing
Connection
2.
Click on the
OK
button to enter the changes. The
“
Done!
”
notation again appears
next to the
OK
button to indicate that the changes have been accepted.
