FIBARO WALLI FGWREU-111, Руководство по эксплуатации

Страница: 17 / 37

17
operatIng the DevIce
• Magenta – device added to a Z-Wave network (Security S2
Authenticated),
• Red – device not added to a Z-Wave network.
State of the device:
• White – load turned ON (configurable using parameters 11 and
12).
Update:
• Blinking cyan – update in progress,
• Green – update successful,
• Red – update not successful.
Menu:
• Blinking green – entering the menu (added as non-secure, S0, S2
non-authenticated),
• Blinking magenta – entering the menu (added as Security S2
Authenticated),
• Blinking red – entering the menu (not added to a Z-Wave network),
• White – start calibration,
• Green – reset energy consumption memory,
• Magenta – start range test,
• Yellow – reset to factory defaults.
8.4: Menu
Menu allows to perform Z-Wave network actions. In order to use the
menu:
1. Quickly, three times click, then press and hold one of the buttons
to enter the menu, device blinks to signal adding status (see 8.3:
Visual indications).
2. Release the button when device signals desired position with
colour:
• WHITE – start calibration
• GREEN – reset energy consumption memory
• MAGENTA – start range test
• YELLOW – reset to factory defaults
3. Quickly click the button to confirm.