FIBARO FGWPG-121 Скачать руководство пользователя

Страница: 3 / 22

DESCRIPTIOn AnD FEATuRES

Main features of FIBARO Wall Plug:

•  Compatible with type G sockets and plugs.
•  Compatible with any Z-Wave or Z-Wave Plus Controller.
•  Supports Z-Wave network Security Modes: S0 with AES-128

encryption and S2 Authenticated with PRnG-based encryption.

• Extremely easy installation - simply plug the device into the mains

socket.

•  Equipped with uSB charging port.
•  Works as a Z-Wave signal repeater.
•  Active power and energy consumption metering for plugged device

and the uSB port.

• Current value of the load and operating mode are indicated by the

multi-colour LED frame.

FIBARO Wall Plug

is a remotely controlled plug-in switch with the

ability to measure power and energy consumption.
It uses a LED frame to visualize the current load and operating mode

with colour changing illumination.
Our smart plug makes it possible to control electrical devices in a

convenient and maintenance-free way.
It is also equipped with a uSB charging port with power metering.

#1: Description and features

FIBARO Wall Plug is a fully

compatible Z-Wave Plus device.

NOTE

This device may be

used with all devices

certified with Z-Wave

Plus certificate and

should be compatible

with such devices pro-

duced by other manu-

facturers.

NOTE

Z-Wave Controller

must support Z-Wave

Security Mode in or-

der to fully utilize the

product.

Содержание FGWPG-121























Результаты поиска

Содержание FGWPG-121

Отзывы:

Похожие инструкции для FGWPG-121

Бренды по названию

Популярные бренды

FIBARO FGWPG-121, Руководство по эксплуатации

Результаты поиска

Содержание FGWPG-121

Отзывы:

Похожие инструкции для FGWPG-121

Бренды по названию

Популярные бренды