63
INCREASING THE MEMORISED SPEED
This can be done in two ways:
❒
by pressing the accelerator and then memorising the
new speed reached;
or
❒
moving the stalk upwards (
+
).
Each movement of the stalk will correspond to an increase
in speed of about 1 km/h, while keeping the stalk held up-
wards will continuously increase the speed.
REDUCING THE MEMORISED SPEED
This can be done in two ways:
❒
by turning the device off and then storing a new speed;
or
❒
by moving the stalk downwards (
–
) until reaching the
new speed which will be memorised automatically.
Each movement of the stalk will correspond to a reduc-
tion in speed of about 1 km/h, while keeping the stalk held
downwards will continuously reduce the speed.
DISENGAGING THE DEVICE
The device can be switched off by the driver in the fol-
lowing ways:
❒
turning twist switch A to OFF;
❒
switching off the engine;
❒
pressing the brake pedal;
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
❒
pressing the clutch pedal;
❒
pressing the accelerator pedal; in this case, the system
is not really switched off but the request for accelera-
tion takes priority. The cruise control is, however, ac-
tive and you do not need to press button RES B-fig. 45
to restore the previous conditions when you have fin-
ished accelerating.
The device is automatically switched off in the following
cases:
❒
if the ABS or ESP systems cut in;
❒
if the car speed drops below the preset limit;
❒
if there is a system failure.
While travelling with the device engaged,
do not put the gear lever into neutral.
WARNING
In case of malfunctioning or if the device
fails, turn twist switch A to OFF and con-
tact a Fiat Dealership.
WARNING
033-077 PUNTO EASY GB 1ed 21/03/14 10.39 Pagina 63