DOC NO. 81009
8 OF 9
Rev A 10/03
4. Setting memory.
Find the desired time you want to set. Press and hold the “STEAM”
button. LED will flash, continue to hold until light stops flashing and remains solid. Turn timer
off by pressing “STEAM” button. Wait 15 seconds and restart your unit. Your desired time
will illuminate,
see figure 8.
5. Diagnostic feature.
The digital control has a unique diagnostic feature. If there is a
malfunction within the unit, it will alert you. The 15-minute light flashes when the control
button is stuck,
see figure 9.
The 60-minute light flashes when the low water sensor is
activated,
see figure 10.
To reset the control when an error occurs, turn the main power to
the generator off and then back on. If the problem persists contact the service department for
further troubleshooting.
Service info. (800) 585-STEAM (7832)
Figure 8
Hold until light flashes
and then stops
Figure 9
Figure 10
