Fiat Connect Nav+ Скачать руководство пользователя страница 75

Страница: 75 / 166

CONNECT NA

V+

“Delete voice command”: allows

deletion of a previously recorded
voice sample; proceed as follows:

– rotate the knob

15-fig. 1

, select

the icon key and then press the knob
to confirm;

– rotate the knob

15-fig. 1

, select

“OK” and then press the knob to con-
firm, the voice sample will be deleted
from the directory.

IMPORTANT

This icon key is ac-

tive only if the concerned entry, in the
directory, is associated to a voice sam-
ple as described previously.

“Listen to voice command”: repro-

duces a previously recorded voice
sample; proceed as follows:

– rotate the knob

15-fig. 1

, select

the icon key and then press the knob
to confirm; the system will reproduce
the selected voice sample.

IMPORTANT

This icon key is ac-

tive only if the concerned entry, in the
directory, is associated to a voice sam-
ple as described previously.

“OK”: confirm changes and stores

them in the directory.

IMPORTANT

If the user after end-

ing these operations doesn’t select
“OK” and confirm by pressing the
knob

15-fig. 1

new settings will not

be stored in the directory.

“Hear voice phonebook”
icon key

This graphic key (“Listening to the

voice diary) makes it possible to re-
produce all the voice samples previ-
ously recorded; proceed as follows:

– rotate the knob

15-fig. 1

, select

the icon key and then press the knob
to confirm; the system will reproduce
stored samples.

Press “ESC”

14-fig. 1

to stop as sug-

gested on the display.

Содержание Connect Nav+







































































































































































Результаты поиска

Содержание Connect Nav+

Отзывы:

Fiat Connect Nav+, Руководство пользователя, Страница: 75 / 166

Результаты поиска

Содержание Connect Nav+

Отзывы: