Fiat Case IH AFS Pro 600, Настройка

Страница: 23 / 51

23
Display Software Setup
(Implement Setup)
ƒ
Step 4: Implement Setup
o
In order to log and map as-applied data, an implement must be set up.
o
Go to Toolbox>Impl to create or edit implements.
o
Create a new implement that matches the implement used with the
Raven System.
o
Implement Width – The total structural width of the implement.
o
Swath Width – The width of the implement that actually performs work.
o
Implement Offset – The distance the center of the implement is offset
from the center of the vehicle (Right = +, Left = -).
o
Max Steer Angle – The maximum angle that the vehicle can turn with
the implement installed. This is used for autoguidance and does not
apply otherwise.
Table of Contents