Fiat Case IH AFS Pro 600, Настройка

Страница: 17 / 51

17
Display Software Setup
(As-Applied Run Screen Windows)
ƒ
Add As-Applied Run-Screen Windows as needed (Toolbox>Layout)
o
There are seven available product layers. For each one, you can display the
amount of product applied, the average rate for the product applied, and the area
for the product applied.
o
Product Amount Applied
¾
This is the total amount of product applied for the current task. This is calculated based on
the actual application rate and the section widths of the active sections while in-work. This
means that if a section is turned off, no product amount applied is accumulated for that
section.
o
Product Area Applied
¾
This is the area on which the product is applied for the current task. This is calculated
based on the section widths of the active sections while in-work. This means that if a
section is turned off, no product area is accumulated for that section. This is different from
the task area, which calculates area based on implement width only when in-work and does
not take into account sections that may be turned off.
o
Product Average Rate
¾
This is the average rate at which the product has been applied for the current task. This is
calculated from the Product Amount Applied and the Product Area Applied.
Table of Contents