Fiat 500X2017, Руководство пользователя

Страница: 74 / 228

DYNAMIC SELECTOR — IF EQUIPPED
The Dynamic Selector combines the capabilities of the vehicle control systems, along with
driver input, to provide the best performance in all driving conditions
.
The Dynamic Selector consists of the fol-
lowing positions:
Auto Mode – This mode is designed for
comfort and safety in normal driving condi-
tions
.
In versions equipped with all-wheel
drive, this mode also reduces fuel consump-
tion by automatically altering the distribu-
tion of torque between the front and rear
axle
.
All Weather Mode – This mode offers in-
creased traction control and stability con-
trol for low traction conditions such as
driving on a dirt road or off road as well as
wet and slippery roads
.
Sport Mode – This mode is designed to
increase steering feedback to the driver with a slight increase in effort and changes the
transmission shift schedules for more aggressive shifting
. This driving mode is useful while
driving on twisty roads where more steering precision is desired in spirited cornering .
Warning Messages
In the event of a system fault, the system automatically defaults to "Auto" mode and a
message will appear in the instrument cluster display
.
Refer to “Instrument Cluster Display” in “Getting To Know Your Instrument Panel” in your
Owner’s Manual at www
. fiatusa . com/en/owners/manuals for further information .
BLIND SPOT MONITORING (BSM) — IF EQUIPPED
The Blind Spot Monitoring (BSM) system uses two radar-based sensors, located inside the
rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles,
etc
. ) that enter the blind spot zones from the rear/front/side of the vehicle .
When the vehicle is started, the BSM warning light will momentarily illuminate in both
outside rear view mirrors to let the driver know that the system is operational
. The BSM
system sensors operate when the vehicle is in any forward gear or REVERSE and enters
stand-by mode when the vehicle is in PARK
.
The BSM detection zone covers approximately one lane width on both sides of the ve-
hicle, 10 ft (3 m)
.
The zone length starts at the outside mirror and extends approximately
20 ft (6 m) beyond the rear bumper of the vehicle . The BSM system monitors the de-
tection zones on both sides of the vehicle when the vehicle speed reaches approximately
6 mph (10 km/h) or higher and will alert the driver of vehicles in these areas
.
Dynamic Selector Switch
OPERATING YOUR VEHICLE
72