Fiat 500X2017, Руководство пользователя

Страница: 36 / 228

Enhanced Accident Response System Reset Procedure
After the event occurs, when the system is active, a message regarding fuel cutoff is dis-
played
. Turn the ignition switch from ignition AVV/START or MAR/ACC/ON/RUN to igni-
tion STOP/OFF/LOCK . Carefully check the vehicle for fuel leaks in the engine compart-
ment and on the ground near the engine compartment and fuel tank before resetting
the system and starting the engine
.
Depending on the nature of the event the left and right turn signal lights, located in the
instrument panel, may both be blinking and will continue to blink
.
In order to move your
vehicle to the side of the road, you must follow the system reset procedure .
Customer Action Customer Will See
NOTE:
Each step MUST BE held for at least two seconds
1
.
Turn ignition STOP/OFF/LOCK
.
(Turn
Signal Must be placed in Neutral State)
.
2 . Turn ignition MAR/ACC/ON/RUN .
Right turn light BLINKS
.
Left turn light is OFF
.
3
.
Turn right turn signal switch ON
.
Right turn light is ON SOLID .
Left turn light BLINKS .
4
.
Place turn signal in neutral state
.
Right turn light is OFF .
Left turn light BLINKS .
5
.
Turn left turn signal switch ON
.
Right turn light BLINKS .
Left turn light is ON SOLID .
6 . Place turn signal in neutral state .
Right turn light BLINKS
.
Left turn light is OFF
.
7 . Turn right turn signal switch ON .
Right turn light is ON SOLID
.
Left turn light BLINKS
.
8 . Place turn signal in neutral state .
Right turn light is OFF
.
Left turn light BLINKS
.
9
.
Turn left turn signal switch ON
.
Right turn light is ON SOLID .
Left turn light is ON SOLID .
10 . Turn left turn signal switch OFF . (Turn
Signal Switch Must be placed in Neutral
State)
.
Right turn light is OFF
.
Left turn light is OFF
.
11 . Turn ignition STOP/OFF/LOCK .
12
.
Turn ignition MAR/ACC/ON/RUN
.
(Entire sequence needs to be completed
within one minute or sequence will need
to be repeated)
.
System is now reset and the engine may
be started
.
Turn hazard flashers OFF (Manually)
.
If a reset procedure step is not completed within 60 seconds, then the turn signal lights
will blink and the reset procedure must be performed again in order to be successful
.
GETTING STARTED
34