Fiat 500X2017, Руководство пользователя

Страница: 50 / 228

WARNING!
• An incorrectly anchored tether strap could lead to increased head motion and
possible injury to the child
. Use only the anchorage position directly behind the
child seat to secure a child restraint top tether strap .
• If your vehicle is equipped with a split rear seat, make sure the tether strap does
not slip into the opening between the seatbacks as you remove slack in the strap
.
Transporting Pets
Air Bags deploying in the front seat could harm your pet . An unrestrained pet will be
thrown about and possibly injured, or injure a passenger during panic braking or in a colli-
sion
.
Pets should be restrained in the rear seat in pet harnesses or pet carriers that are se-
cured by seat belts
.
HEAD RESTRAINTS
Head restraints are designed to reduce the risk of injury by restricting head movement in
the event of a rear impact
. Head restraints should be adjusted so that the top of the
head restraint is located above the top of your ear
.
WARNING!
• All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s
seat until the head restraints are placed in their proper positions in order to mini-
mize the risk of neck injury in the event of a crash
.
• Head restraints should never be adjusted while the vehicle is in motion
.
Driving a
vehicle with the head restraints improperly adjusted or removed could cause seri-
ous injury or death in the event of a collision
.
Front Head Restraints
Your vehicle is equipped with driver and passenger head restraints .
To raise the head restraint, pull upward on the head restraint . To lower the head re-
straint, push the adjustment button, located on the base of the head restraint, and push
downward on the head restraint
.
To remove the head restraint recline the backrest of the seat to avoid interference with
the roof
.
Raise the head restraint as far as it can go then push the release button and
adjustment button at the base of each post while pulling the head restraint up . To rein-
stall the head restraint, put the head restraint posts into the holes and push downward .
Then adjust it to the appropriate height
.
GETTING STARTED
48