manualshive.com logo in svg

Fiat 1998 Marea Weekend, Руководство по обслуживанию

Скачайте бесплатно сервисный мануал для Fiat 1998 Marea Weekend на нашем сайте. Руководство позволяет вам самостоятельно проводить техническое обслуживание и ремонт автомобиля. Получите необходимую информацию для правильного ухода за вашим авто. Посетите manualshive.com и загрузите руководство прямо сейчас.

Поделиться
Скачать
background image

Marea • Marea Weekend

 Braking system 

Anti-lock brakes 

33. 

The wheel speed signals are sent by the active sensors to the electronic control unit. 
The frequency of these signals provides the controlunit with the corresponding speed, acceleration or 
deceleration values for the individual wheels. 
A reference speed is processed from the combination of the individual peripheral wheel speeds which, 

being constantly updated, indicates the speed of the vehicle at any moment. 

When the driver presses the brake pedal the wheels may decelerate in differing degrees: by comparing 
the peripheral speed of the individual wheels with the reference speed it is possible to constantly control 
the creeping of each individual wheel. 

If the braking force causes one wheel to creep in relation to the others (known in English as

 split),

 the elec-

tronic control unit gives the command to the electro-hydraulic control unit solenoid valves to reduce the 

braking force at the wheel where there is a loss of grip. The wheel concerned then regains speed. 

NOTE The peripheral speed of a braking wheel decreases to a greater extent than that of the vehicle, with 

the wheels completely locked through the braking action (peripheral speed of the wheel = 0) and 
the vehicle still moving the difference between these two speeds is at the maximum value. 

This difference is known as creeping or the slipping coefficient when expressed as a percentage. 

Creeping 0% = free wheel 
Creeping 100%

 =

 wheel locked and vehicle moving 

During braking the friction coefficient tends to increase when the braking takes place with limited 

creeping (rolling) and decrease when the sliding of the tyre is accentuated until it locks. 

By means of a considerable number of practical tests and experiments it has been proven that, ge-
nerally, it is possible to reach the maximum braking force with creeping values of between 10% 
and 20%. This defines an optimum area within which the anti-lock brakes operate for all types of 

vehicles. 

The electronic control unit also contains deceleration and acceleration threshold figures in its memory 
which each individual wheel should never exceed. 
Therefore, by means of a systematic, continuous and extremely rapid comparison of the wheel slipping, 
deceleration and acceleration values the rolling of the tyre during braking is kept in check. 

As soon as the acceleration/deceleration and combined

 split

 threshold values are exceeded, the elec-

tronic control unit intervenes, operating the electro-hydraulic control unit solenoid valves in the three 

regulation stages to decrease, maintain or restore the pressure created by the driver on the brake pedal to 

the brake calipers, restoring the braking conditions to the optimum values for the system. 

These stages determine an intermittent, but extremely fast adjustment cycle which is repeated until the 
vehicle stops. The electronic control unit controls the various stages, supplying the solenoid valves with 

impulses of variable lengths. It is also ensures that both the rear wheels receive the same braking force 

applied to the rear wheel most likely to lock, i.e. the one with less adhesion (to ensure optimum trajecto-
ry stability). 

The A.B.S. system is also activated when braking in reverse gear. 

Usually, the intervention of the device ceases at speeds below 5 kph to allow the wheels to lock com-

pletely with the vehicle stationary. 
Since the parameters which the control unit controls (wheel speed and acceleration) are affected by the 
inertia of the wheel/tyre assembly, vehicles equipped with anti-lock brakes

 should only be fitted 

with the wheel rims, tyres and brake pads recommended by the Manufacturer. 

Copyright by Fiat Auto 

3 

Содержание 1998 Marea Weekend















































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 1998 Marea Weekend

Cadillac 2011 CTS COUPE Personalization Manual preview
2011 CTS COUPE
Бренд: Cadillac Страницы: 20
Cadillac 2011 CTS COUPE Specifications preview
2011 CTS COUPE
Бренд: Cadillac Страницы: 2
Cadillac 2009 CTS Owner'S Manual preview
2009 CTS
Бренд: Cadillac Страницы: 494
Cadillac 2008 Escalade Owner'S Manual preview
2008 Escalade
Бренд: Cadillac Страницы: 500
Cadillac 2006 Escalade Warranty And Owner Assistance Information preview
2006 Escalade
Бренд: Cadillac Страницы: 40
Cadillac 2004 DeVille Owner'S Manual preview
2004 DeVille
Бренд: Cadillac Страницы: 432
Cadillac 1997 Catera Owner'S Manual preview
1997 Catera
Бренд: Cadillac Страницы: 338
Cadillac 2009 STS Get To Know preview
2009 STS
Бренд: Cadillac Страницы: 20
Cadillac 2005 STS Owner'S Manual preview
2005 STS
Бренд: Cadillac Страницы: 438
Jeep Renegade Owner'S Handbook Manual preview
Renegade
Бренд: Jeep Страницы: 212
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Бренд: Mobis Страницы: 16
Subaru starlink Manual preview
starlink
Бренд: Subaru Страницы: 216
Quadratec Brute Strength 12057.0271 Installation Manual preview
Brute Strength 12057.0271
Бренд: Quadratec Страницы: 6
Axxess AXGMLN-08 Installation Instructions Manual preview
AXGMLN-08
Бренд: Axxess Страницы: 8
Whispbar K561W Fitting Instructions Manual preview
K561W
Бренд: Whispbar Страницы: 15
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Бренд: Audi Страницы: 12
B-Speech Sima User Manual preview
Sima
Бренд: B-Speech Страницы: 4
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Бренд: NavLinkz Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды