ENGLISH
CG VITRO Glass Ceramic Contact Grills - Installation and Operating Manual - 06/07/2016
7
1.4.
Recycling
Disposal of the packaging material: Recycle the transport and protective packaging material.
Ensure that any plastic wrappings are disposed of safely and kept out of the reach of children.
Danger of suffocation.
Disposal of the equipment: Electric and electronic contact grills often contain materials which, if
handled or disposed of incorrectly, are potentially hazardous to human health and the
environment. Please do not dispose of any component of the equipment with household waste.
Dispose of it at your local community waste collection/ recycling centre, or contact your dealer for
advice.
2. Description
1.
Handle for the lid
2.
Lid with upper plate
3.
Lower plate
4.
Drip tray
5.
Button for the deactivation of the upper plate
6.
Control knob for temperature regulation (50-250ºC)
7.
Orange signal light
2.1.
Technical characteristics
The main technical characteristics are fixed on the type plate that is fixed to the equipment.
2.2.
Necessary connections
1 earthed electric mains supply with a 30mA protection and a 20 A circuit breaker
3. Installation and basic adjustments
3.1.
Usage location
Choose a dry location for the contact grill where it cannot come in direct contact with water. Do not
direct water jets onto the equipment!
Choose a stable and leveled surface to place the contact grill on.
The contact grill should not be installed close to inflammable or heat-sensitive materials. If this is
not possible, isolate the space surrounding the contact grill with a non-inflammable, heat resistant
isolation material.
3.2.
Unpacking
Before using the contact grill for the first time, remove all plastic protections. Make sure the contact grill
is complete. Dispose safely of the plastic wrapping as they are potentially dangerous. Clean the exterior
of the contact grill with a soft humid cloth.
Fig. 1
