FIAMM SoNick I&O - 48TL160H rev.0
– July 2013
pag.4
1 SAFETY
1.1 Purpose
This manual provides information required to install and operate the FIAMM SoNick 48TL160H
battery.
Anyone involved in handling, installing or using the FIAMM SoNick 48TL160H battery must read
and understand this manual.
1.2 Safety Precautions
To prevent damages to the batteries and personal injuries, following safety instructions need to be
followed all the times:
Do not install the battery if you notice physical damage
Do not place the battery on its power terminals, with the front plastic cover facing down or
upside down
Do not pack the battery when it is hot
Do not expose the battery to temperatures above 90°C (194°F) or below -40°C ( 40°F)
Do not allow metal objects to rest on the battery or to fall across the terminals
Remove rings or metal wristbands when working with the battery
Use insulated tools to install the battery
Use all the handles when handling the battery
Unlike traditional batteries, this Sodium Nickel battery can be charged or discharged only
when the internal temperature reaches the operative value. Whenever the internal
temperature is below, the battery acts as a passive device.
Before use, be sure to fully understand the battery functionality described in this manual.
2 GENERAL INFORMATION
2.1 Introduction
The 48TL160H is a 48 Volt
– 160Ah complete battery system designed for stationary applications.
This battery, assembled with four strings of Sodium-Nickel cells in a 20 cell series configuration, is
provided with internal electric heaters to achieve and maintain the internal working temperature of
265°C. The thermal insulation of the battery is such that, with an internal temperature of 265°C, the
surface temperature of the enclosure is just a few degrees above the environment. The battery
enclosure has a good thermal insulation thanks to the
vacuum between the inner and the external box.
The battery is provided with an electronic controller (BMS) which manages all the battery functions
and ensures a reliable and safe operation.
2.2 Unpacking And Inspections
FIAMM SoNick carefully tests and inspects the battery before shipment.
Upon receiving a shipment of batteries, open the wooden crate box and check the battery and
hardware against the packing list.
Report any damage immediately to the carrier if the shipment shows signs of damage in transit.
Also notify your FIAMM SoNick customer service representative.
