FIAMM SoNick I&O - 48TL160H rev.0
– July 2013
pag.22
5.10.2 Thermal Protection
Thermal protection devices are used to prevent battery overheating situations. The
following is a list of the thermal protections built in each battery:
To maintain the battery internal temperature between 265 and 350 °C (509-662°F),
heaters activated by a closed-loop temperature control system, are managed by the
BMS.
The BMS will temporarily
disconnect the battery
path should its internal temperature
exceed 350°C (662°F).
The BMS will cut power to the battery heaters should the battery temperature be
above 350°C (662°F).
5.10.3 Mechanical Protection
Batteries are packed with a double stainless steel case and cells are hermetically sealed
with metal cases which fully enclose the active materials and which are so constructed and
closed to prevent the release of the active materials under normal conditions.
5.10.4 Reliability
A battery failure in a multi-battery installation will not cause the battery backup system to fail
nor will it cause the other batteries to malfunction. The defective battery will take itself off-
line from the other batteries. Power to the load will not be compromised with the only effect
being a reduction in the backup time.
5.11 Technical Assistance
For technical assistance or any questions concerning FIAMM SoNick or any of its products, contact
us.
Appendix
