19
FIG.10
FIG.2
To definitively cancel ONE or MORE entrance codes, you must:
access the “programming” facility
A.
with the door open, keep your finger pressed on spring latch
and press
the master code on the keyboard
, followed by the # key (fig. 10).
B.
the acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the “programming” mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C.
Keeping the spring latch
constantly pressed, digit the numeric code that
must be cancelled followed by the # key (fig. 10). The buzzer will confirm
each code eliminated from the electronic memory with 3 brief beeps.
release the pressure on the spring latch
to exit the programming mode.
To definitively cancel ALL the entrance codes (total reset), you must:
access the “programming” facility
A.
with the door open, keep your finger pressed on spring latch
and press
the master code on the keyboard
, followed by the # key (fig. 10).
B.
the acoustic alarm will emit a rising scale of beeps, to warn you that the
lock is in the “programming” mode.
The lock will only remain in this mode (programming) for as long as
you keep the spring latch pressed. You will automatically leave the pro-
gramming mode by releasing it.
C.
Keeping the spring latch
constantly pressed, press the green and black
keys located on the internal plaque
(fig. 2) together for at least two sec-
onds. The buzzer will emit one long beep to confirm.
This operation also simultaneously deletes all the TAGs and any re-
mote-controls being used.
release the pressure on the spring latch
to exit the programming mode.
5
P
1A
5
p
5
P
p
2
5
5
1A
5
BASIC PROGRAMMING