manualshive.com logo in svg

FIAM. x1R, Руководство пользователя, Страница: 13 / 25

Поделиться
Скачать
FIAM. x1R Скачать руководство пользователя страница 13

13

Read this section carefully to make sure the product is working sat-

isfactorily to guarantee you with the maximum security.

Both your door manufacturer and installer have carried out trial tests using
a general code. Now you must NECESSARILY store your personalized code
number and that of your electronic keys 

, where required, in the mem-

ory in order to be guaranteed with the maximum security. 
You can memorize up to a maximum of 128 code numbers and/or TAG, if
required.

Registering your personalized codes means that no other unautho-
rized code can be used, i.e. the codes (and TAG) registered by you will
be the only electronic commands capable of opening your door. 

PRELIMINARY PHASE: MEMORIZING THE NEW ENTRANCE CODES

Numeric codes must be programmed at two different levels: at least one at
“master” level whilst the others will be at “service” level. 

The “master” codes enable their holder to:
• open the lock
• have access to programming 
• change the functional mode
• activate new codes and/or "master" keys
• activate and deactivate “service” codes and/or keys
• totally reset the memory

With the enabled “service” codes the holder may:
• open the lock

Personalized codes, be they either “master” or “service”, must be

made up of a minimum of four to a maximum of eight figures.
If your system includes using both keyboard and TAG x.Keys, you must
first follow the instructions for memorizing the numeric codes, then go
to page 5 of this manual where you will find details on how to register
and use the transponders.

4

BASIC PROGRAMMING

SYSTEM WITH KEYBOARD AND INTEGRATED TAG TRANSPONDER

Содержание x1R


























Отзывы:

Нет отзывов