FIAM. TETRIS T-66, Информация о продукте

Страница: 8 / 20

2.3) Use
2.3.1) Intended Use
Once removed from its original packaging, the TETRIS Mirror must be placed on a perfectly flat surface.
All the TETRIS Mirror's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the TETRIS Mirror
may lose stability, making it hazardously unstable. Weights, objects and loads must be evenly distributed across the surface of the
TETRIS Mirror and well balanced in order to ensure stability and safety. Unevenly placed or unbalanced weights, objects and loads
on the surface of the TETRIS Mirror may reduce its stability and thus its safety. Sharp items or anything which may damage the
glass (such as chemical products containing hydrofluoric acid) should not be placed on the surface of the TETRIS Mirror. If objects
of this kind are placed on the surface of the TETRIS Mirror in spite of this warning, you are urged to take adequate precautions
to prevent damage to the float glass.
When placing sharp objects on the surface of the TETRIS Mirror, a mat of insulating material (such as rubber, cork, plastic or
leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects. Never place
items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.
2.3.2) Warnings - Incorrect use and Non-recommended use
Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the TETRIS Mirror.
The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible
circumstances for incorrect or non-recommended uses of the TETRIS Mirror, which must be evaluated on each occasion. Do not sit
or stand upon the glass surface of the TETRIS Mirror. Do not use the glass surface of the TETRIS Mirror as a chopping surface.
Do not strike the TETRIS Mirror with hammers or pointed items which may crack or shatter the glass.
Do not use powder detergents or detergents containing abrasives for cleaning the TETRIS Mirror, since they may damage the float
glass. Do not clean the mirror using products containing ammonium.
Do not use the TETRIS Mirror for DIY work or for mechanical, electrical or electronic repairs.
In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the TETRIS
Mirror. Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above
+30°C (such as foods just removed from the oven) on the TETRIS Mirror; exposing the mirror to stresses of this kind may damage
the glass, reducing its strength and thus its safety level. Never expose the TETRIS Mirror to intense heat sources (such as stoves
or ovens); exposing the mirror to stresses of this kind may damage the glass, reducing its strength and thus its safety level.
Do not expose the TETRIS Mirror to temperatures below -10°C or weather; exposure of this kind may damage the glass, reducing
its strength and thus its safety level.
The TETRIS Mirror should be placed well away from items such as coat racks or ornaments which may accidentally fall onto its
surface.
2.4) Moving the Mirror
To ensure that the TETRIS Mirror is moved in the conditions of the utmost safety, we urge you to comply with the instructions
provided below:
The mirror must always be handled by at least two people, wearing gloves which assure a good grip on the float glass.
Safety instructions
2