fiac New Silver Series, Руководство по эксплуатации и обслуживанию

Страница: 14 / 60

r
emaInIng Hours to maIntenance
Push button for 5 seconds to see remaining hours to mainte-
nance�
If time is already expired, a negative number will be shown (e.i -3) alter-
nately to the compressor status.
u
ser
m
enu
- s
ettIng
Push button and togheter for at least 5 seconds to enter
the Setting parameters Area�
The setting menus are accesible to different levels only entering a pas-
sword.
To enter the password (111)
Push once (display shows 100) and confirm pressing
Push once (display shows 110) and confirm pressing
Push once (display shows 111) and confirm pressing
MINIMUM PRESSURE setting (*)
Min = 5,5 bar / 80 psi - Max.15 bar / 218 psi
N.B display does not show comma/dot:
055 = 5,5 bar (as shown on the example)
MAXIMUM PRESSURE setting (*)
Min = 6 bar / 87 psi - Max.15,5 bar / 225 psi
N.B display does not show comma/dot:
100 = 10,0 bar (as shown on the example)
(*) Adjustment is only possible on models equipped with a pressure sen-
sor (BP)..
TO MODIFY setting
push (value is flashing) :
Push buttons and to change values , and . to confirm.
By pushing you can confirm setting and move forward.
If you don’t want to change the setting press to move forward, or to move backward.
At the end of the menus, display will show “OUT”, press to exit and go back to the compressor status .
During the setting procedure, if any button is not pushed for 60 seconds, the control panel will exit automatically.
81 55
8.2 50
81 55
8.2 50
55
50
55
50
14
5. u
sIng tHe compressor