FHM FH-25G, Руководство по эксплуатации и запасным частям

Страница: 12 / 37

Farmer-Helper 25 & 27G 12 Revision06/2017
LUBRICATION
The Model 27G is designed to require little maintenance and lubrication. However, it is still
important to keep all moving parts well lubricated. Following a regular maintenance and lubri-
cation schedule will enhance the operation and increase the life of the spreader significantly.
The following pages show the grease points on the spreader. The operator should establish a
systematic routine to ensure complete and quick lubrication of the spreader.
The spreader should be greased every 50 loads or once a month. Wipe the old grease and any
dirt or dust off the grease fittings before greasing so it doesn’t get forced into the bearing.
There are two grease fittings inside the
front cover on the engaging lever pivot.
One on each side of the spreader.
Figure 6
There is a grease fitting on each wheel
hub.
Figure 7