Fhiaba GranMaestro Series, Руководство по установке и инструкция пользователя

Страница: 73 / 76

73 www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420162
EN
16. CARE AND CLEANING
16.1 Care and Cleaning
To clean the parts made of steel use a microfiber
cloth and the sponge provided in the kit with the
appliance. Always use the cloth and sponge in the
direction of the steel’s satin finish.
> Every now and then, to polish the steel, wipe
with a slightly damp microfiber cloth.
> Do not use the sponge on aluminium parts,
such as the handles and the profiles of the glass
shelves.
> You should use special care to keep the venti-
lation openings in the appliance or in the cabinet
that houses it, free of obstructions.
Note
Scrupulously follow the detailed directions
that can be found in the provided kit and
never use abrasive or metallic products
which could scratch and damage the satin
finishing on the appliance permanently.
16.2 Condenser cleaning
A ventilation grille is located at the bottom.
To clean it use a vacuum cleaner with a soft
brush attachment at maximum power, sweeping
it along the vent slits. In case of a significant dust
build up, the ventilation grille can be removed to
allow a more accurate cleaning of the filter.
16.3 Internal cleaning
> Clean the internal and removable parts by wa-
shing them with a solution of lukewarm water
with a small amount of dishwashing detergent.
> Rinse and dry right away.
> Do not use mechanical devices or other me-
thods to speed up defrosting.
Note
Do not bring cold glass parts into contact
with boiling water.
Do not wash any parts of the refrigerator
in a dishwashing machine since this could
damage or irreparably deform the parts.
Warning
Do not use water on the electrical parts,
lights and control panel.