Fhiaba GranMaestro Series, Руководство по установке и инструкция пользователя

Страница: 41 / 76

41 www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420162
EN
2.1 Installation
Make sure that installation is performed correctly,
adhering to all directions in the specific installation
manual provided with the appliance.
Attention
Do not use extension cords and/or
multiple adapters for the power supply
connection.
2.2 Connection to the water system
(if present)
Models containing an Ice Maker require a connec-
tion to a potable water supply system. This can
be executed through a 1/4” water line (copper or
polyethylene) from the house water supply.
The system pressure must be between from 8 psi
to 75 psi (between 0.5 bar and 5 bar).
Pressures outside of those specified can cause
malfunctions or leaks in the water system.
Symbols used in the Manual:
Note
tips for correct use of the appliance
Important
Warnings to prevent damage to the
device
Attention
Warnings to prevent injury to persons
1.3 Caring for the environment
> Pay special attention to correct disposal proce-
dure for all the packaging materials.
> The appliance must not be disposed of with urban
waste. Contact local waste disposal centres for in-
formation on how to dispose of recyclable waste.
> Prior to disposal, cut the power supply cord and
make it impossible to close the door.
> During disposal, avoid damage to the refrigeration
circuit.
> The appliance does not contain hazardous sub-
stances for the atmospheric ozone layer, neither in
the refrigeration circuit nor in the insulation.
1.4 Cleaning, sanitization and mainte-
nance of the ice and/or water dispenser
(if present)
Failure to follow the instructions regarding sanitiz-
ing can compromise the hygienic safety of the wa-
ter dispensed.
> When using the appliance for the first time and
every time the filter is changed, it is recommended
to let the water flow in the circuit using the “Manual
Cleaning” and discard the ice produced in the first
24 hours.
> If the water dispenser has not been used for more
than 4/5 days, it is advisable to clean the circuit and
run off the first litre of water.
> Reposition the removable water dispenser (if pre-
sent), ensuring your hands are hygienically clean.
> Clean the ice bucket or drawer regularly but using
only drinking water.
> The filter must be changed when indicated on the
control panel or when the ice maker/water dispenser
has not been used for more than 30 days.
> With each filter replacement, sanitise the ice and/
or water distribution system using a food grade dis-
infectant (with sodium hypochlorite), which does not
alter the characteristics of the materials.
Rinse with at least 2 litres of water before use.
> Only original spare parts supplied by the manu-
facturer should be used when replacing compo-
nents in the ice and water dispenser.
> Any work on the appliance must be carried out
by a qualified technician or authorized After-Sales
Service.
2.INSTALLATION