Short Manual ResistTel IP2 / IP152
Page 23
ExResistTel IP2 / IP154
2.1.3
Do not disturb
You can turn off the do not disturb function of the VoIP telephone
ResistTel IP2 / IP152 simply by pressing a key, for example if you do not wish to be
disturbed during a meeting.
1.
To activate the do not disturb function; press the key for about a second
whilst in idle mode until the display appears in Figure 14. The telephone reacts to
an incoming call depending on how this feature is configured at the time. For
further details on how to configure the do not disturb feature (see manual).
2.
To deactivate the do not disturb function again; press the key again for about
a second until the signalling in the display is deleted. Afterwards the device will
respond to calls in the usual way again.
Torsten 72
06.01.10 14:40
Figure 14: Do not disturb
2.1.4
Different Types of Call Numbers
In addition to normal call numbers, your VoIP telephone can also dial H.323 names
and IP addresses.
Call numbers consisting of characters other than the digits 0 to 9 and the characters
* and # are considered to be H.323 names. Call numbers beginning with the
character @ are always regarded as H.323 names. The @ is removed before dialling
however.
2.1.5
Input of Characters and Special Characters
You can enter any Western European characters in accordance with ISO 8859-1
using the keypad. The assignment of the characters and special characters to the
keys can be seen in Table 7.
The letter mode is activated by pressing the respective key pad for an extended
moment of time. Subsequently, it is possible to switch between the letters by
pressing the key several times in short intervals or by keeping the key pressed.
