Short Manual ResistTel IP2 / IP152
Page 11
ExResistTel IP2 / IP154
1.4.3
Version one Switch LAN Module with two LAN
Connections with Cable Screw Cap
•
2 LAN connections internal
•
Housing with 1 cable screw caps and 2 bored holes with sealing plugs at the
upper side.
Box contents
The scope of the delivery includes:
-
Telephone
-
Printed short manual
-
Manual on CD
-
1 LAN female connector for cable mounting from AMP NETCONNECT (TE
Connectivity), order-no. 116604-2
-
2 keys for TORX socket screws TX20, TX30
1.4.4
Version one Switch LAN Module with two LAN
Connections with Cable Screw Cap
•
1 LAN connection female housing connection
•
1 LAN connection and sealing plug at the housing
•
Housing with 1 bored hole with sealing plug at the upper side
Box contents
The scope of the delivery includes:
-
Telephone
-
Printed short manual
-
Manual on CD
-
LAN connector from Phoenix Contact Type VS-08-RJ45-5-Q/IP67, order-no.:
1656990
-
2 keys for TORX socket screws TX20, TX30
1.5
Mounting and Installing
The device must be installed on a plane surface only, in vertical operating position.
Loosen the cover screws (2) (see Figure 6 to Figure 8) and detach the upper part of
the telephone (1). If the optional accessory headset or a second earpiece is being
employed, attach the bracket (10) using two screws (11) to the rear panel of the
lower part of the telephone. (With the accessories named before, the bracket and
screws are in the scope of delivery. With all accessories a cable gland is delivered.)
Put four screws, having a head diameter of 10 to 13 mm into the holes (20) and
attach the lower part of the telephone (3) to the wall or to a holder.
