4) Scene settings
a. Modify name: modify the selected scene name.
b. Upload scene: upload the scene on the PC side and overwrite the selected scene.
c. Save scene: Save the current running parameters to the selected scene.
d. Save as: Save the currently running parameters to the PC in a scene.
e. Load scene: enable the currently selected scene, usually used for scene change.
f. Restore factory settings: restore all scene configurations to the default configuration.
This device supports two ways to save scenes offline and online. Offline save is to save the set scene on the PC,
which is convenient for subsequent recall and scene copying between different devices. Saving a scene online is to
save the scene directly to the device, which can be recalled directly after turning on the device next time
.
4 DSP module
4.1 Input Setting
The input signal can be an analog signal or a test signal generated inside the device. If it is a network version with
Dante, it can also be a network digital signal;
The analog signal can be selected by adjusting the sensitivity to adjust the input; from -60~0, every 3dB;
Mute: the channel is muted when selected;
