1
TABLE OF CONTENTS
Introduction, General Information, Serial Number ……………………………………………..1
Definitions of Safety Terms and Symbols ……………………………………………………… 2
Accident Prevention, Safety Instructions…………………………………………………… 3-4
Safety Signs…………………………………………………………………………………….5-6
Power Unit Specifications …………………………………………………………………………7
Mounting …………………………………………………………………………………………… 7
Hydraulic Connection……………………………………………………………………………… 7
Setup ………………………………………………………………………………………………. 8
Operation ……………………………………………………………………………………………9
Maintenance………………………………………………………………………………………..10
Service ……………………………………………………………………………………………...11
Parts Illustration……………………….……………………………………………………………12
Parts List ………………………………..……………………………………………………..….. 13-14
Cylinder Illustration & Parts List ………………………………………………………………….15
Specifications & Requirements……………………………………………………………………15
Warranty ……………………………………………………………………………………………. i
INTRODUCTION
Congratulations on your purchase of a new
FFC Attachments Cold Planer
. This product has been designed and built for
planing & milling asphalt. This product may also be used for roughing concrete. You or any other person who will be
assembling, operating, maintaining, or working with this product are required to read and completely understand the
information and instructions contained in this manual. If anyone does not fully understand every part of this manual,
please obtain further assistance by contacting the dealer from which this product was purchased or by contacting FFC
Attachments at the telephone number or address listed on the cover of this manual. Keep this manual available for
reference whenever this product is being handled or used. Provide this manual to any new owners and/or operators.
This manual covers model(s): LAF5412 & LAF5413
GENERAL INFORMATION
The purpose of this manual is to assist in assembling, mounting, operating, and maintaining your Planer: read this manual
carefully to obtain valuable information and instructions that will help you achieve years of safe and dependable service.
The illustrations and data used in this manual were current at the time of printing, but due to possible engineering and/or
production changes, this product may vary slightly in detail. FFC Attachments reserves the right to redesign and/or
change components as necessary without notification to anyone.
Throughout this manual, references may be made to:
Power Unit
The engine-driven machine to which this product must be attached.
Right, Left, Front, Rear
Directions that are determined in relation to the operator of the equipment when
seated in the normal operating position.
IMPORTANT
Precautions that must be followed to prevent damage to equipment.
NOTICE
Precautions that must be followed to prevent substandard performance.
SERIAL NUMBER LOCATION
Always refer to the model and serial number when ordering parts or requesting information from your dealer. The serial
number plate for this product is located on the upper left of your Planer.
Reference Information
Model Number
Loader Make
Serial Number
Loader Model
Date Purchased
Loader Serial #
Содержание LAF5412
Страница 2: ......
